Class III M Fixation with Sinus Crestal Elevation and GBR with a Ti mesh

Dr. Nam Yoon Kim 김남윤원장님

Author
Dr. Nam Yoon Kim, DDS, MDS, PhD

Director of Global Academy of Osseointegration
Seoul, Korea



슬라이드3
A 58-year-old male, good general health despite 20 years of smoking.
Pre-op panorama: Bilateral partial edentulism on the maxilla. Both posterior regions require sinus augmentation for implant placement. Severe bone loss and PDL space widening around the maxillary left 2nd premolar (#25). The extraction socket of the 2nd molar (#27) was not completely healed.
슬라이드4
Soft tissue healing three weeks post-extraction.

슬라이드5
Bony defects at the extraction sites of 2nd premolar and 2nd molar.

슬라이드6
Crestal approach for sinus lifting and grafting with the SCA reamer.

슬라이드7
Crestal approach for sinus lifting and grafting with the SCA reamer.

슬라이드8
Crestal approach for sinus lifting and grafting with the SCA reamer.

슬라이드11
Three implants placed at the sites of #25, 26, 27. The threads of the #25, 27 implants are exposed due to the size of the bony defect.

슬라이드12
FDBA graft packed over the implants and defects.

슬라이드13
A titanium membrane was placed over the graft.

슬라이드14
Titanium membranes are preferred to resorbable membranes in terms of space maintenance.

슬라이드15
Interrupted suture with supramid 4-0.

슬라이드16
Post-op panorama.

10
As shown in the chart, the initial stability for #25 was low (approx. 5 Ncm), compared to 20 Ncm for #26 and 35 Ncm for #27 respectively.

슬라이드17
Soft tissue healing at 2nd surgery.

슬라이드18
Removal of titanium membrane after 10 weeks.

슬라이드19
Note the excellent bone formation underneath the titanium membrane.

슬라이드20
The implants were uncovered by removing the excess bone formed on top of the implants.

슬라이드21
Unique flap design to maximize the keratinized gingiva.

슬라이드22
The final prosthesis on the left side will be fabricated after the grafted bone matures.

슬라이드23
Soft tissue was healed around healing abutment after 2nd surgery.

슬라이드24
Monolithic zirconia restorations were fabricated for final prosthesis.

슬라이드25
Stock abutments were milled to fabricate cement-retained prosthesis.

슬라이드26
The final prosthesis (splinted monolithic zirconia crowns) was delivered after contact and occlusal adjustments.

슬라이드27
The final prosthesis (splinted monolithic zirconia crowns) was delivered after contact and occlusal adjustments.

슬라이드28
Occlusal access holes (for SCRP prosthesis) were prepared at the fossa areas.

슬라이드29
The fit of the prosthesis was verified on periapical x-ray.

슬라이드30
After final cementation with permanent resin cement and removal of the excess cement by removing the whole prosthesis.

슬라이드31
3-year follow-up panorama.

8
5-year follow-up panorama.

9
6-year follow-up panorama.

The maxillary left 2nd premolar (#25) was extracted due to severe bone loss and mobility. After 3 weeks of soft tissue healing, 3 implants were placed at the #25, 26, 27 sites. Crestal sinus grafting was performed for all three sites with the S-reamer (SCA tech.) Following the implant placement, large bony defects were noted around the #25 & 27 fixtures (Class III M fixation). The gaps between fixtures and the walls of the bony defects were filled with allogenic graft material. Following the bone packing, a titanium mesh was covered over the graft site, and fixed with suture material. A titanium membrane with a collagen membrane cover is preferred for the graft due to its excellent space maintenance. After 10 weeks, the titanium mesh was removed, and the graft site revealed bone overgrowing.Healing abutments were connected. 

590 Total Views 1 Views Today
0 Comments

Leave a reply

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Copyright (c) GAO Forum. All Rights Reserved.

 

Forgot your details?