Crestal sinus elevation with SCA technique using Neo SinusAll kit

허영구 원장님 Dr. Heo

Author
Dr. Young-Ku Heo, DDS, MDS, PhD

Director of Global Academy of Osseointegration
Seoul, Korea



슬라이드2
Pre-op panorama

슬라이드3
The treatment plan was as follows:
Sinus graft by crestal approach (SCA tech.) at the time of implant placement at #15 and 17


슬라이드4
Intra-oral photograph

슬라이드5
Ø 2.2 drill (1200 rpm)

슬라이드6
Ø 2.8 drill (1200 rpm)

슬라이드7
Ø 3.2 drill (1200 rpm)

슬라이드8
Ø 3.7 drill (1200 rpm)

슬라이드9
Ø 3.2mm S-reamer (1200 rpm) of the Sinus All kit with 8mm, 9mm, 10mm, 11mm and 12mm stopper were used at the area of #15.

슬라이드10
Ø 3.9mm S-reamer (1200 rpm) of the Sinus All kit with 3mm, 5mm, 6mm and 7mm stopper were used at the area of #17.

슬라이드11
After serial drilling with twist drills, S-reamers were used with at least 1200 rpm, starting by drilling 1mm less than the depth to the sinus floor, then continuing up to the opening of the inferior wall of the sinus.

슬라이드13
The depth gauge was used to detect the opening of the inferior wall and measure the actual bone length.

슬라이드12
#1 elevator. One end is designed to detach the membrane at the mesial side and the other end for the distal side.
It is recommended that the membrane is detached at mesial and distal sides first with the #1 elevator.


슬라이드16
The same amount of saline as planned for sinus membrane elevation was prepared in the syringe.

슬라이드14
An Aqua tap of the SinusAll kit was connected to the drilling site for elevating the sinus membrane with hydraulic pressure.

슬라이드19
Aqua valve with saline syringe was linked to the access hole of the firmly fixed Aqua Tap.

슬라이드15
The plunger of the syringe was moved forward and backward with attention not to cause the sinus membrane to tear. After elevation, bone graft material was inserted in the usual manner.

슬라이드20
Allograft was inserted into the space of the elevated sinus membrane.

슬라이드22
Neobiotech IS-III Ø 4.5x10mm fixture was placed in the area of #15.

양채윤
Neobiotech IS-III Ø 5.5x10mm fixture was placed in the area of #17.

슬라이드24
Surrounding bone was trimmed with a bone profile (50rpm).

슬라이드28
Healing abutments were placed on the implants.

슬라이드29
Panoramic radiograph taken after implant placement.

슬라이드30
Click on the image to see clinical video.

This case shows how to elevate the maxillary sinus membrane and graft the sinus crestally using the water press membrane elevation technique.

1438 Total Views 2 Views Today
0 Comments

Leave a reply

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Copyright (c) GAO Forum. All Rights Reserved.

 

Forgot your details?