Immediate Placement with the Crestal Sinus Elevation in Limited Available Bone Height

허영구 원장님 Dr. Heo

Author
Dr. Young-Ku Heo, DDS, MDS, PhD

Director of Global Academy of Osseointegration
Seoul, Korea



슬라이드1
A 49-year-old female No significant medical history and occasional daytime clenching.
#25 and 26 were extracted due to endodontic failures caused by fractured endo files. Immediate implant placement was planned for both sites. The heights of the residual bone were 7mm for #25, 3-4mm for #26 and 2-3mm at #27. Sinus graft was performed by crestal approach for all sites.
슬라이드2
Immediately after extractions. For #26, osteotomy was used, and aimed at the center of septum.

슬라이드3
The height of the residual bone was expected to be 3-4mm on the radiographs. The S-reamer of 3.6mm diameter with 3mm stopper was used to drill through the septum.

슬라이드4


슬라이드5
The intact sinus membrane is visible through the osteotomy opening.

슬라이드6
Sinus membrane at the buccal part of sinus floor is lifted with an SLA #01 elevator.

슬라이드8
After the elevation of the sinus membrane, 1cc of alloplast biomaterials, CalporeⓇ (60% beta-tricalcium phosphate and 40% hydroxyapatite) was packed below the elevated sinus membrane.

슬라이드9
An implant fixture (Neobiotech IS II 5.0X8mm) is placed after the bone packing. High final insertion torque (about 30 Ncm) was obtained from the fixation at the crestal cortical bone only.

슬라이드10
Immediately after implant placements. Note the gaps between implants and the extraction socket walls.

슬라이드11
Cover screws were tightened to prevent the bone particles from entering the connection part of the implants. 0.5 cc of RegenOss™ (FDBA) was used to fill the gaps around implants.

슬라이드12
After the bone packing, the cover screws were removed and wide healing abutments were connected to seal the opening of the extraction sockets. The use of wide healing abutments will prevent the loss of bone grafts, and make suture unnecessary.

슬라이드13
Panoramic x-ray immediately after implant placements.

슬라이드14
1 month after implant placement soft tissue healing is completed.

슬라이드22
Splinted monolithic zirconia crowns were fabricated.

슬라이드24
Two and a half months after implant placement the abutments were tightened in the patient’s mouth.

슬라이드25
After cementing the final prosthesis, screw holes were filled temporarily.

슬라이드26
Lateral view of the final prosthesis in occlusion.

슬라이드28
Periapical x-ray after the delivery of prosthesis confirms the fit of the final prosthesis.

슬라이드29
Panoramic x-ray one year after the delivery of the final prosthesis.

슬라이드31
Periapical x-ray at 1 year follow-up after the delivery of the final prosthesis. Note the peri-implant bone remains at its original level.

#25 and 26 were extracted due to endodontic failures caused by fractured endo files. Immediate implant placement was planned for both sites. The heights of the residual bone were 7mm for #25, 3-4mm for #26 and 2-3mm at #27. Sinus graft was performed by crestal approach for all sites.

54 Total Views 2 Views Today
0 Comments

Leave a reply

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Copyright (c) GAO Forum. All Rights Reserved.

 

Forgot your details?